Synetec Membrane Cleaners

Synetec P3 Acidic Membrane Cleaner

Synetec P11 Alkaline Membrane Cleaner

Synetec L11 Alkaline Membrane Cleaner

Synetec L12 Membrane Cleaner

Hydrovida provides an entire line of membrane cleaner chemistries specifically formulated for different uses. Hydrovida cleaners are designed to be extremely effective in removing a variety of different scales, oils, greases, bio-growths, rusts, silts and other common problematic materials. Hydrovida membrane cleaners contain zero phosphorus.

Reverse Osmosis Membrane Cleaners

Request Cleaner Recommendation

Reverse Osmosis (RO) is a very selective purification process that removes almost the entire amount of impurities in water. Because of this highly selective trait, reverse osmosis systems are highly prone to impurity deposition and fouling. Additionally, with water recovery demand in RO systems increasing due to dissipating water supplies, scaling has quickly grown into a very common occurrence. Hydrovida provides membrane cleaners as part of our membrane healthcare programs customized for each system to help maximize the running lifetime of costly RO membranes. 
Hydrovida has a line of formulated multi-component cleaners designed to remove a variety of common problematic foulants. These cleaners have been determined to be compatible with polyamide thin film composite membranes in a laboratory setting. Hydrovida cleaners have even been proven compatible at elevated temperatures exceeding 50°C on some membranes, making them great as an addition to heat sanitization cleaning. Each Hydrovida cleaner is buffered to resist pH change so that they are aggressive on the targeted foulant, while being as light on the membrane surface as possible. Hydrovida application experts can determine a customized cleaning regimen targeted specifically to the exact type of fouling occurring in your system for maximized cleaning results by use of an unknown sample analysis and cleaning study. 

Ultrafiltration Membrane Cleaners

​Ultrafiltration (UF) is a process that physically removes very small suspended solids from almost any type of water source. These suspended solids quickly accumulate onto the UF modules and cause elevated Trans Membrane Pressures (TMPs). Typically, UF modules and membranes are cleaned with generic chemicals such as citric acid, caustic soda and bleach; however, sometimes these generic cleaners are not enough to restore the UF performance. Hydrovida has a line a UF cleaners for use when a recovery clean is necessary to fully restore UF performance to manufacturer’s specifications. Each UF cleaner is specifically formulated for certain types of fouling that can easily be determined by an unknown foulant identification.