Stop paying for water you pour down the drain.
Your cooling towers, boilers and RO systems are costing you more than they should in water, energy and repairs. Hydrovida finds where the money is going, fixes it with chemistry we make ourselves, and proves the savings with lab data.
- 80+ facilities served
- Est. 2019
- CSLB C-55 #1076504
- CA DPR #45730
- CA DGS Certified Small Business #2024415
- NSF/ANSI/CAN 60 certified chemistry
- 80+
- Facilities served
- $36K
- Average yearly savings per customer
- 30%
- Average water reduction
- 0
- Customers lost to performance
Averages across Hydrovida customers. Savings include water, sewer, energy and chemical costs.
If your water treatment is working, you shouldn't have to wonder.
- “Your tower's fine.”
But the bleed runs constantly and your water bill keeps climbing.
- “The softener's working.”
But there's scale in the boiler and white crust on every fixture.
- “That's normal rust.”
But the chilled water loop runs brown and the pumps keep failing.
- “We'll check it next visit.”
But nobody has looked at the chemical feed in months.
Most water problems aren't chemistry problems. They're nobody-is-checking problems. Hydrovida tests, adjusts and reports on every visit, so you always know where your systems stand.
Programs built for your equipment and your water.
Cooling towers & HVAC
Run more cycles, buy less water, and keep scale, corrosion and Legionella under control.
Boilers & steam
Protect tubes, cut fuel and blowdown costs, and stop condensate corrosion before it stops production.
Closed loops
Stop rusty water, plugged strainers and failing pumps in chilled and hot water loops.
Water softening
Softener running but water still hard? We test, tune, service and replace commercial softeners.
RO & water purification
Antiscalants, membrane cleaning and troubleshooting that keep membranes running longer.
Wastewater treatment
Meet discharge limits and lower sewer surcharges, with chemistry chosen by jar test.
Water reuse
Turn blowdown, RO reject, condensate and recycled water into water you don't have to buy.
Custom projects
Need a new RO system, an added cooling tower or rerouted wastewater? We plan, spec and coordinate it.
Service & maintenance
Weekly or monthly service, chemistry and reporting, all for one fixed monthly fee.
Controllers & remote monitoring
Catch problems the day they start, and ask us about California rebates on new controllers.
Cooling tower repair
Restore an aging tower cell by cell, for a fraction of the cost of a new one.
Cooling tower cleaning
Remove the sludge, scale and slime that cost you capacity, with before-and-after photos.
Small chemistry problems turn into big bills.
- Water and sewer
- A tower at 3 cycles of concentration buys about 25% more water and sends about 2.5 times as much to the sewer as the same tower at 6 cycles.
- Energy
- Scale on condenser tubes and boiler surfaces acts like insulation, so chillers and boilers burn more power and fuel for the same work.
- Equipment
- Corrosion and scale shorten the life of towers, boilers, pumps and membranes, and the replacements cost far more than treatment.
- Risk
- Biofilm shelters Legionella. A positive test means retesting, disinfection and paperwork at best.
Across our customers, that adds up to $2.3M+ and 15M+ gallons of water saved every year.
Gallons estimated conservatively from average tower size and run time.
At one San Diego County food plant, our assessment found an estimated $74,000–$107,000 a year in savings across one cooling tower and four boilers.
(Working estimate, not a guarantee.)
We make our own chemistry, so we can match it to your water.
Most treatment companies resell someone else's products. Hydrovida formulates antiscalants, inhibitors, cleaners and biocides in-house, chosen for measurable performance and a cleaner environmental profile. NSF/ANSI/CAN 60 certified where it applies.
When something goes wrong, we find out why.
Our lab runs SEM/EDS, ATR-IR, GC-MS and elemental mapping, plus membrane autopsies and Title 22 and AAMI compliance testing. Instead of guessing why a membrane fouled or a boiler scaled, we identify what's on the surface and fix the cause.
Built for facilities that can't afford downtime.
Hospitals, food plants, hotels, fabs, power plants, campuses and farms all run on water systems that have to work every day. Pick your industry to see the risks we manage for you.
Operating in the systems that keep cities, plants, and hospitals running.
Engineered. Measured. Verified.
- 01AssessA local rep tests your water on-site and walks your system. Free, no obligation.
- 02FormulateWe build a program around your water, equipment and goals.
- 03DeployWe install feed and control equipment, set dosing and train your staff.
- 04VerifyEvery visit ends with a written report: test results, what we adjusted and what it's saving you.
Local techs across California, plus Arizona, Nevada and Northern Mexico.
- San Diego
- Los Angeles & Orange County
- Inland Empire
- Imperial Valley
- Central Valley
- Bay Area & Sacramento
- Yuma
- Reno
- Baja California & Sonora
Questions
What does the free water analysis include?
A local rep tests your makeup and system water on-site, reviews your equipment and current program, and tells you what they find. There's no cost and no obligation.
Can you take over from our current provider?
Yes. We review your current program and records, and transition without downtime.
What size facilities do you work with?
Everything from a single building's cooling tower to multi-tower central plants and industrial process water.
Do you only serve San Diego?
No. We're based in Carlsbad, with techs serving all of California plus Yuma, Reno and Northern Mexico.
Find out what your water is costing you.
A Hydrovida rep will test your water on-site and show you where the savings are. No cost, no obligation.